Setting Preparation Parameters - Struers TegraPol 21 Manuel D'instructions

Setting Preparation Parameters

46
TegraPol-21/ -25/ -31/ -35
TegraForce-3/ -5
Instruction Manual
When a TegraDoser-1 has been fitted to the TegraPol / TegraForce
system, the dosing level must be set. This is done using the control
panel software:
The dosing parameters are only displayed
when the water parameter is set to OFF.
D
With the SINGLE SAMPLES menu already displayed:
Within this menu, there are 2 new preparation parameters,
D
Doser No. and Level
Options
Water
Doser No.
Level
Use the Arrow buttons
q
Q
level and press ENTER
The TegraPol software is now ready to begin the preparation
process.
All preparation parameters set in this menu are remembered by the
firmware in the TegraPol together with the bottle ID of the TegraDoser.
When the TegraDoser is used on another machine, a different set of
parameters can be set as it is the TegraPol that records the information, not
Note:
Settings Comment/Change Increment
ON or OFF Must be set to OFF to use
dosing feature (is automatically
set to OFF when a
TegraDoser-1 is inserted)
0 – 9
indicates ID setting of rotary
switch on TegraDoser
0 – 20
to select the desired dosing
mON
e
to confirm.
Note
the TegraDoser.
Information only:
1