Manual Preparation - Struers TegraPol 21 Manuel D'instructions

Manual Preparation

TegraPol-21/ -25/ -31/ -35
TegraForce-3/ -5
Instruction Manual
If a specimen cannot be prepared using a standard specimen mover
plate or specimen holder, it can be prepared manually, with the
automatic dosing.
Select the required preparation step and make sure that the

specimen mover is in the upright position.
Press Start.

Press Enter to confirm selection of a Manual preparation step

Press Start again to start the preparation step.

Dosing of suspension and lubricant runs automatically according
to the pre-set parameters and the step is stopped automatically
when the set preparation time has expired.
39