Pre-Operation Checks; Engine Cover Removal/Installation; Engine Cover Fixing Lever - TOHATSU BFT 60A Manuel D'utilisateur

BFT60A/BFW60A is 4-stroke, water
cooled outboard motor which uses
unleaded gasoline for fuel. It also
requires the engine oil. Check the
following before operating the
outboard motor.
Perform the following
pre-operation checks with the
engine stopped.
Before each use, look around and
underneath the engine for signs of oil
or gasoline leaks.

Engine Cover Removal/Installation

(front)
LOCK
• To remove, raise the front and rear
engine cover fixing levers and
remove the engine cover.
• To install, set the engine cover,
hook the front and rear latches, and
push down the front and rear
engine cover fixing levers.

6. PRE-OPERATION CHECKS

LATCH
ENGINE COVER
FIXING LEVER
UNLOCK UNLOCK
Do not operate the outboard motor
without the engine cover.
Exposed moving parts can cause
injury.
(rear)
LOCK
53