Fuel Priming; Starting The Engine (H Type) - TOHATSU BFT 60A Manuel D'utilisateur

STARTING THE ENGINE
FUEL LINE CONNECTOR
(TO FUEL TANK)
(fuel tank side)
2. Connect the fuel tube assembly to
the fuel tank.
Be sure the fuel tube assembly
connector is securely latched.
Always disconnect the fuel line
when storing or transporting the
outboard motor.
64
FUEL FILLER CAP
VENT KNOB
OPEN
3. Turn the fuel filler cap vent knob
counterclockwise all the way to
open the vent.

Fuel Priming

ARROW
PRIMER BULB
INLET END
(tank side)
Hold the priming bulb so that the
outlet end is higher than the inlet (so
that the arrow on the priming bulb
points up), and squeeze it until it feels
firm, indicating that fuel has reached
the outboard motor. Check for leaks.
Be careful not to spill any fuel.
Spilled fuel vapor may ignite. If
any fuel is spilled, make sure the
area is dry before starting the
engine.
OUTLET END
(outboard
motor side)