Trim Tab Adjustment - TOHATSU BFT 60A Manuel D'utilisateur

Trim Tab Adjustment

The trim tab is provided to adjust for
"torque steer" which is a reaction of
the propeller rotation or propeller
torque. If during a high speed turn an
unequal amount of effort is required
to turn the boat right or left, adjust the
trim tab so that an equal amount of
effort is required.
Distribute the load evenly in the boat
and run the boat in a straight course at
full throttle. Slightly turn the steering
wheel/handle for both right and left
turns to determine the amount of
effort required.
LEFT
LEFT
TRIM TAB
BFT60A model:
Loosen the tightening bolt to adjust
the trim tab.
BFW60A model:
Remove the gear case grommet and
loosen the tightening bolt to adjust
the trim tab. After adjustment,
reinstall the grommet securely.
(BFT60A model)
GEAR CASE
GROMMET
LEFT
TIGHTENING BOLT
If less effort is required to make left
turns:
Loosen the trim tab tightening bolt
and turn the rear end of the trim tab
toward the left. Tighten the bolt
securely.
OPERATION
(BFW60A model)
TIGHTENING
BOLT
TRIM TAB
93