Manual Relief Valve; Tilt Lock Lever - TOHATSU BFT 60A Manuel D'utilisateur

CONTROLS AND FEATURES (Common)

Manual Relief Valve

MANUAL RELIEF VALVE
If the power trim/tilt switch will not
tilt the outboard motor, the outboard
motor can be manually tilted up or
down by opening the manual relief
valve. To tilt the outboard motor
manually, turn the manual relief valve
under the right stern bracket no more
than three and a half turns
counterclockwise using a
screwdriver.
After tilting the outboard motor, turn
the manual relief valve clockwise
securely.
34
POWER MANUAL
(To fix) (To release)
Check that nobody is under the
outboard motor before opening the
manual relief valve. If the manual
relief valve is loosened (turned
counterclockwise) when the
outboard motor is tilted up, the
outboard motor will suddenly tilt
down.
The manual relief valve must be
tightened securely before operating
the outboard motor or the outboard
motor could tilt up when operating in
reverse.

Tilt Lock Lever

FREE
LOCK
TILT LOCK LEVER
Use the tilt lock lever to raise the
outboard motor and lock it in the
position when the boat is moored or
anchored for a long time.
Tilt the outboard motor as far as it
goes and move the lock lever in the
locking direction.