TOHATSU BFT 60A Manuel D'utilisateur page 115

MAINTENANCE
ITEM
Fuel filter
(Low pressure type)
Fuel filter
(High pressure type)
Fuel line
Battery and cable connection
Bolts and Nuts
Crankcase breather tube
Cooling water passages
Water pump
Emergency stop switch
Engine oil leak
Each operation part
Engine condition (6)
Power Trim/Tilt
Shift Cable
(2) These items should be serviced by your servicing dealer, unless you have the proper tools and are mechanically proficient. Refer to
the TOHATSU Service Manual for service procedures.
(3) For professional commercial use, log hours of operation to determine proper maintenance intervals.
(4) When operating in salt water, turbid or muddy water, the engine should be flushed with clean water after each use.
(5) Check for water and contamination.
(6) Upon starting, check for unusual engine sounds and cooling water flowing freely from the check hole.
(8) The user who performs shift operation frequently will recommend you exchange of a shift cable around three years.
(9) Check the fuel line for leaks, cracks, or damage. If it is leaking, cracked, or damaged, take it to your servicing dealer for replacement
before using your outboard.
(10) Replace the fuel line if there are signs of leaks, cracks, or damage.
112
REGULAR SERVICE PERIOD (3)
Perform at every indicated month
or operating hour interval,
whichever comes first.
Check
Replace
Check
Replace
Check
Replace
Check level-tightness
Check-tightness
Check
Clean
Check
Check
Check
Check
Check
Check
Check-adjust
First
month
Each use After use
or
20 hrs.
o (5)
o (9)
Every 2 years (If necessary) (2) (10)
o
o (2)
o (4)
o
o
o
o
Every Every Every
6 months year 2 years
or or or
100 hrs. 200 hrs. 400 hrs.
o
o
o (2)
o (2)
o (2)
o (2)
o (2)
o (2)
o (2) (8)
Refer to
page
121
—
—
62
—
61, 116
—
—
—
—
—
—
—
—
—
—