Troubleshooting; Digital Display; Maintenance; Replacing The Bulb In The Light Unit - SOMFY Dexxo Pro io Manuel D'utilisation

Dexxo Pro io

5 - trouBleshootinG

5.1 digital display

The LCD display is situated under the lighting cover. It provides motor operation
status.
The main operating codes are as follows:
Code description
Waiting for a command
Door opening
Waiting for the door to
close
Door closing
Obstacle detection
Safety input active
Pedestrian door safety
contact active
Working from back-up
battery
Waiting for a command
If other codes are displayed, contact your Somfy installer.

6 - MaintenanCe

6.1 replacing the bulb in the light unit

[1] [2].Remove the light cover.
[3] [4]. Unscrew and replace the defective light bulb.
[5] [6] [7]. Refit the light cover.
Use a 230 V 40 W E14 socket light bulb.

6.2 Checking

> the obstacle detection function
Every month, check that the door reverses direction when an obstacle prevents
the door from closing (at least 50 mm above floor level).
> the safety mechanisms (cells, pedestrian door contact, sensor
bar)
Check correct operation every month (See section 4.2).
> the back-up battery
To ensure optimum battery life, we recommend that the power to the motor
is switched off and the door is operated for a number of cycles using battery
power (three times a year).
6
Comments
Indicates that the door encountered an
obstacle. The display is maintained for
30 s after detection.
Indicates that an obstacle preventing
door closure is present between the
photoelectric cells or is in contact with
the safety sensor bar installed on the
door.
Indicates that the pedestrian door within
the garage door is open. Door operation
is inhibited.
Indicates that the main power supply
to the motor is cut and that the motoris
powered by the battery back-up pack.

6.3 replacing a Keytis remote control battery

6.4

replacing a Keygo remote control battery

7 - teChniCal sPeCiFiCations

Basic technical
dexxo Pro 800
specifications
Mains power supply
Power consumption on standby
Max. power consumption
Traction force
Use
50 cycles per day with a high performance
Number of channels that can be
memorised
Radio frequency
Integrated light
Remote controlled lighting
Operating temperature
1.5V LR3
dexxo Pro 1000
230 V - 50 Hz
5 W
600 W (with 500 W remote controlled
lighting)
800 N 1000 N
20 cycles per day with a standard rail
(tested for 36,500 cycles)
rail (tested for 90,000 cycles)
Situo io/Keygo io: 9 Others: unlimited
868 - 870 MHz
< 25 mW
230 V / 40 W max. E14 socket
230 V / 500 W max. Class 2
Halogen or incandescent only
-20 °C / +60 °C
Copyright © 2015 Somfy SAS. All rights reserved