Angelo Po BX61E Manuel D'utilisation page 38

P05 - Cooking program: for whole roast
chicken
P06 - Cooking program: for rare roast
beef
– The button modifi es the preset standard regenera-
tion programs.
Press the key to show the program of choice on the
display (11).
Press the button (2) to start the program selected.
Once the program has been started only, buttons
(6-7- 8-9) and knob (10) can be used to modify the
values set for the current stage.
During cooking, buttons (3-4-5) can be used to
modify the cooking mode.
Nota: Changes made in this way only remain ac-
tive for the current cooking process; to save them
permanently, press the button of the cooking
mode (3-4-5) being used for at least 3 seconds.
Important
To return to the original settings, with the
appliance in the STOP phase (green light of button
(2) on),press the button (14) and hold it down for
longer than 3 seconds (the whole panel powers
down) then press the button (15) until PrG ok
appears.
15) Fun speed button
With the appliance in START phase only (after
cooking starts) press the button to set the fan at
intermittent speed:
– Button (15) off : maximum speed.
– Button (15) lit and display (13) with rotating
dot: intermittent speed
16) Quick cooling button / Semiautomatic wa-
GB
shing button:
Press the (16) button once to select "semi-automa-
tic washing", press the (16) button twice to select
the "quick cooling" function.
With the "quick cooling enabled" function:
– for cooling the cooking chamber quickly with the door closed.
Press the button and the display (11) will show the message "100°C" and the display (12) the
message "CLd".
Press the button (6) and turn the knob (10) to set the cooling temperature required.
Press the key (2) to start the program. At the end of the cycle the appliance shuts down and a
buzzer sounds.
– For enable / disable the function of cooldown during cooking.
With the appliance in the STOP phase (green light of button (2) on),press the button (14) and
hold it down for longer than 3 seconds (the whole panel powers down).
Press button (16) and turn the knob (10) for selecting the "cooldown ON/OFF" mode.
Press button (16) to save the selected function.
Important
Do not use this function while cooking is in progress.
With the "semi-automatic washing" function enabled: press the (2) button to start semi-auto-
matic washing.
17) The "delay start" button: is used to start delayed cooking.
3326460_ut_GB_rev.2
Automatic preheating 220°C
Stage 1 - Combined / 200°C / Humidity 30% / 9'
Stage 2 - Convection / 230°C / vent open / 12'
Stage 3 - Convection / 245°C / vent open / 16'
Automatic preheating 230°C
Stage 1 - Convection / 210°C /vent closed / 3'
Stage 2 - Convection / 220°C / vent open / 6'
Stage 3 - Convection / 235°C / vent open / 4'
1
11
6
7
8
14
15
10
- 10 -
3 4 5
REAL
INJ
18
2
12
9
13
17
16
ENGLISH