Angelo Po BX61E Manuel D'utilisation page 37

With button (9) ("product core probe" temperature
setting) pressed:
– In cooking pause status it shows the value of
the temperature set.
– During cooking it shows the value of the tem-
perature measured by the probe.
13) Humidity percentage display
– In mixed cooking mode (convection + steam) it
shows the value of the percentage humidity set.
– In steam cooking mode, it indicates which function
has been set (Std or SUP).
14) Alarm reset button: for resetting the alarm bee-
pers and lights.
15) "Regeneration" programs button / Fun speed
button
– The button selects the preset standard regeneration
programs.
Press the button (once) and the display (11) will
show the message P01.
Press the button (twice) and the display (11) will
show the message P02.
Press the button (3 times) and the display (11) will
show the message P03.
Press the button (4 times) and the display (11) will
show the message P04.
Press the button (5 times) and the display (11) will
show the message P05.
Press the button (6 times) and the display (11) will
show the message P06.
Press the button (7 times) and the display (11) will
show the message OUT and quit the program. Press
the button (2) to start the program selected.
Table of preset regeneration programs
P01 - Food-in-dish regeneration
program: for thin pieces of meat and
fi sh (both precooked and raw)
P02 - Food-in-dish regeneration
program: for thin pieces of meat and
large fi sh
P03 - Food-in-dish regeneration
program: for meat and fi sh in general
(increase the time in stage 2 for pasta or
stuff ed items)
P04 - Cooking program (product core
probe): for lean roast pork
P05 - Cooking program (product core
probe): for whole roast chicken
P06 - Cooking program (product core
probe): for rare roast beef
P04 - Cooking program: for lean roast
pork
3326460_ut_GB_rev.2
1
11
6
7
8
14
15
10
Automatic preheating 130°C
Stage 1 - Combined / 110°C / Humidity 10% / 2'
Stage 2 - Convection / 130°C / vent closed / 3'
Stage 3 - Convection / 125°C / vent open /1'
Automatic preheating 150°C
Stage 1 - Combined / 130°C / Humidity 10% / 3'
Stage 2 - Convection / 135°C / vent closed / 3'
Stage 3 - Convection / 140°C / vent open /1'
Automatic preheating 150°C
Stage 1 - Combined / 130°C / Humidity 10% / 2'
Stage 2 - Convection / 140°C / vent closed / 5'
Stage 3 - Convection / 140°C / vent open /3'
Automatic preheating 120°C
Stage 1 - Steam / 100°C / 8'
Stage 2 - Combined / 140°C / Humidity 60% / Final core temperature 57°C
Stage 3 - Convection / 170°C / Final core temperature 68°C /vent open
Automatic preheating 205°C
Stage 1 - Convection / 185°C / vent open / 8'
Stage 2 - Convection / 215°C / vent open / 12'
Stage 3 - Convection / 240°C / Final core temperature 72°C / vent open
Automatic preheating 165°C
Stage 1 - Convection / 145°C / Final core temperature 20°C / vent open
Stage 2 - Convection / 110°C / Final core temperature 42°C / vent open
Stage 3 - Convection / 90°C / Final core temperature 54°C / vent open
Automatic preheating 120°C
Stage 1 - Steam / 100°C / 7'
Stage 2 - Combined / 145°C / Humidity 60% / 30'
Stage 3 - Convection / 165°C / vent open /15'
- 9 -
3 4 5
REAL
INJ
18
2
12
9
13
17
16
GB
ENGLISH