Activating a Program from the Remote Control
Panel
A program that has been stored to one of the four program slots may be activated to
become the current stimulation program. The activated program may then be modified
in the Programming screen. Depending on the steps you take below, you may activate a
program with stimulation on or stimulation off.
To activate a program:
1
Click the program on the right of the screen that you want to activate.
Note: The symbol indicates last activated or saved program.
2
To activate the program with stimulation on, click
If stimulation is off, stimulation will turn on. If stimulation is already on,
stimulation will remain on.
3
To activate the program with stimulation off, click
If stimulation is on, stimulation will turn off. If stimulation is already off,
stimulation will remain off.
Note: If the current program has not been saved, then a pop‑up window will ask if
you want to continue. If you do not want to save the current program, click
save the current program, click
to continue and activate the selected program. If you do want to
Managing Programs
.
.
and save the current program.
Vercise™ DBS Programming Manual
91053785-17 43 of 1705