Swapping The Leads - Boston Scientific Vercise DBS Mode D'emploi

Vercise™ DBS Programming Manual

Swapping the Leads

By default, Bionic Navigator assigns contacts 1 through 8 (1‑L port) to the Lead that
appears on the left and contacts 9 through 16 (2‑R port) to the Lead that appears on the
right.
To aid in programming the Stimulator, you may wish to rearrange the display so that
the Lead connected to port 1‑L (contacts 1 through 8) appears on the right, and the Lead
connected to port 2‑R (contacts 9 through 16) appears on the left.
Note: This function only visually changes the order of the Leads on the Configuration
and Programming screens. It does not change the order of the Leads displayed
in reports or programs, which list contacts 1 through 8 followed by contacts
9 through 16.
To rearrange the display of the Lead(s) (left to right):
1
Click
2 Click
3 Click
Vercise™ DBS Programming Manual
91053785-17 18 of 1705
from the Configuration screen.
to change the connection of the Leads to the Stimulator ports.
to save your changes or to exit without saving your changes.