Synchronizing Data - Boston Scientific Vercise DBS Mode D'emploi

Synchronizing Data

To synchronize data between the database on the Clinician Programmer and the
Patient Card:
1 Insert the Patient Card into any unused USB port. The Patient Card may be any
external storage device (for example, a USB flash drive).
2
Click
3 Check the box in front of a specific patient's name or click
all the patients.
Note: If a discrepancy is found between a patient's information on the Clinician
Programmer and the Patient Card, a window will pop‑up displaying both
sets of information. Click
or click
4 Click
patients' names will appear in the right side of the screen, and no names will be
selected.
5 Click
on the toolbar of any screen.
to cancel data synchronization for this patient.
. When synchronization is complete, the synchronized
.
Synchronizing Data
under the correct set of information
Vercise™ DBS Programming Manual
91053785-17 59 of 1705
to select