Basic Settings; Changing The Basic Settings - HYDAC ELECTRONIC ENS 3000 Notice D'utilisation

ENS 3000
9

Basic settings

The function of the ENS 3000 can be adapted to suit the particular application by altering
several basic settings. These settings are combined in a single menu.
9.1

CHANGING THE BASIC SETTINGS

NOTE:
• When the menu is activated, no switching operations are carried out!
Activating the Basic Settings menu:
HYDAC
mode
press the "mode" key and
hold it down.
Switch on the supply volltage
(hold key down until "MEnu"
appears in the display)
To close the Basic Settings menu:
Select the "END" menu item, set to "YES": the ENS 3000 returns to normal display mode
after 2 s.
NOTE
:
• If there is no activity in this menu for approx. 25 seconds, the menu will
automatically close and any changes you have made will not be applied.
Status 19.09.2018
→
→
3s
Display
(release the
"mode" key)
press "mode" key until the
required parameter
appears. Then release the
key. (Overview, see 9.2)
HYDAC ELECTRONIC GMBH
HYDAC
→
mode
use the
change the setting, and then
select the next menu item.
Page17
HYDAC
mode
and keys to
Part No. 669849