Order Details - HYDAC ELECTRONIC ENS 3000 Notice D'utilisation

ENS 3000

15 Order details

Serial-no.
(determined by manufacturer)
Temperature sensor
1 =with temperature sensor
2 =without temperature sensor
Only possible with output options "2", "3" and "5"
Mechanical connection
1 =22 mm diameter collar to fit
Electrical connection
6 = M12x1, 4 pole
only possible with output options "2" und "3"
(connector not supplied)
8 = M12x1, 5 pole
only possible with output options "5"
(connector not supplied)
P = M12x1, 8 pole
only possible with output options "8"
(connector not supplied)
Output
2 =2 switching outputs
(in conjunction with electrical connector type "6" only)
3 =1 switching output and 1 analogue output
(in conjunction with electrical connector type "6" only)
5 =2 switching outputs and 1 analogue output
(in conjunction with electrical connector type "8" only)
8 =4 switching outputs and 2 analogue outputs
(in conjunction with electrical connector type "P" only)
Probe length
0250, 0410, 0520, 0730 mm
Modification number
000 = standard (determined by manufacturer)
Material of probe
K =ceramic
Status 19.09.2018 HYDAC ELECTRONIC GMBH
ENS 3 X 1 X – X –XXXX – 000 – K
Page29
Part No. 669849