Programming Enables; Altering The Operating Programming Enable - HYDAC ELECTRONIC ENS 3000 Notice D'utilisation

ENS 3000

11 Programming Enables

The unit has 2 program enables which must both be enabled in order to modify the
settings.
The operating program enable can be set or cancelled during operation. It provides
protection against unintentional alterations of settings.
A programming disable via the main programming enable prevents any changes from
being made to the settings during operation. This serves, for example, as a safety function
or as protection against unauthorised alterations.

11.1 ALTERING THE OPERATING PROGRAMMING ENABLE

HYDAC
→
0s
mode
Press both arrow keys
simultaneously
(Data not changed)
3 s
(Data changed)
3 s
Status 19.09.2018
→
→
0s
6s
Display
(release
arrow keys)
Fluid level indication
Pressure
bar
Fluid level indication
Pressure
3 s
HYDAC ELECTRONIC GMBH
HYDAC
mode
Use the or keys to alter the settings
FrEE = programming enabled
Loc = programming disabled
Page22
Part No. 669849