Basic Settings; Changing The Basic Settings - HYDAC ELECTRONIC HNS 3000 Notice D'utilisation

HNS 3000
8

Basic Settings

The function of the HNS 3000 can be adapted to suit the particular application by altering
several basic settings. These settings are combined in a menu.
8.1

CHANGING THE BASIC SETTINGS

NOTICE:
• When the menu is activated, no switching operations are carried out!
Activating the Basic Settings menu:
HYDAC
mode
Press the "mode" key and
keep it pressed.
Switch on the supply volltage
(keep key pressed until
"MEnu" appears in the
display)
To exit the Basic Settings menu:
Select the "END" menu item, set to "YES": the HNS 3000 returns to normal display mode
after 2 s.
NOTICE:
• If there has been no activity in this menu for approx. 25 seconds, the menu will
automatically close and any changes you have made will not be applied.
Version 2018/07/06
→
→
3s
Display
(release the
"mode" key)
Press "mode" key until the
required parameter
appears. Then release the
key. (Overview, see 8.2)
HYDAC ELECTRONIC GMBH
HYDAC
→
mode
Use the
change the setting, and then
select the next menu item.
Page 14
HYDAC
mode
and keys to
Part No. 669927