Resetting The Peak Values - HYDAC ELECTRONIC ENS 3000 Notice D'utilisation

ENS 3000
Setting
Version number (Version)
Displays the current software version.
(view only)
Close the basic settings menu (End)
The basic settings menu
is closed.
Further changes can be
made to the basic settings.
If any basic settings have been altered, "ProG" appears briefly in the display as soon as
the basic settings menu is closed and then the value selected for primary display is
shown.
* This menu point appears only on versions with 1 or 2 SP.
** This menu point appears only on versions with 4 SP.

10 Resetting the peak values

There is an option for resetting the peak values of the fluid level and of the temperature
(depending on the model)
HYDAC
mode
Press both arrow keys
simultaneously and hold
them down for 3 s.
Status 19.09.2018
HYDAC
→
3s
mode
HYDAC ELECTRONIC GMBH
Display
→
Fluid level indication
Page21
Setting Default
range setting
YES/ NO NO
Part No. 669849