Safety Information; Exclusion Of Liability; Functions Of The Ens 3000 - HYDAC ELECTRONIC ENS 3000 Notice D'utilisation

ENS 3000
1

Safety Information

Before commissioning, check the instrument and any accessories supplied. Before
commissioning, please read the operating instructions. Ensure that the instrument is
suitable for your application.
Incorrect handling and/or failure to comply with the operating instructions or technical
specifications can result in damage to property and/or persons.
2

Exclusion of liability

This operating manual was made to the best of our knowledge. Nevertheless and despite
the greatest care, it cannot be excluded that mistakes could have crept in. Therefore
please understand that in the absence of any provisions to the contrary hereinafter our
warranty and liability – for any legal reasons whatsoever – are excluded in respect of the
information in this operating manual. In particular, we shall not be liable for lost profit or
other financial loss. This exclusion of liability does not apply in cases of intent and gross
negligence. Moreover, it does not apply to defects which have been deceitfully concealed
or whose absence has been guaranteed, nor in cases of culpable harm to life, physical
injury and damage to health. If we negligently breach any material contractual obligation,
our liability shall be limited to foreseeable damage. Claims due to the Product Liability shall
remain unaffected.
In the event of translation, only the original version of the operating manual in German is
legally valid.
3

Functions of the ENS 3000

Depending on the model, the instrument has the following functions:
• Display of the actual fluid level in cm or inch (depending on version).
• Display of the actual temperature in °C or °F.
• Display of the minimum and maximum value of fluid level or temperature or of a pre-
set switching point
• Switching of the switch outputs based on the fluid level or temperature and the pre-
set switch parameters
• Analogue output
• Menu for the basic settings (ENS 3000 is adjustable to the particular application)
• Programming Enables
Status 19.09.2018 HYDAC ELECTRONIC GMBH
Page5
Part No. 669849