4Wd Gp Racing Chassis Promo 30 - Reely ROAD Promotion 30 Notice De Montage

b) 4WD GP Racing Chassis Promo 30
2/4 WD
/4 Wheel Drive driven by  or 4 wheels.
ABC assembly
ABC means "Aluminum", "Brass" and "Chrome". Aluminum with its small thermal expansion and small weight serves as material for pistons, the cylinder is
made of brass with chrome-plated contact surface.
Ackermann effect
To set the progressiveness of the steering angle on the wheel's inward angle (Ackerman angle), the tie-rods in the steering arms can
be adjusted to different steering points.
Air filter
The air filter is made of foam and prevents the penetration of dust and dirt particles through the suction hole into the carburettor and in the engine.
Alignment
Position of the wheel level to the driving direction:
a) Toe-in – Wheels point inwards
b) Toe-out – Wheels point outward
Axle leg
This is where the axle turns. The steering levers are located on the front axle legs.
Bumper
Made of impact resistant synthetic material for excellent damping in case of a frontal crash.
Chassis
The "frame" of the vehicle, to be precise, only the bottom support plate.
CVD drive shaft
A shaft which on one side engages the attachment on the differential with a steel pin and which on the other side is connected to the axle without tolerance
via a cardan joint, leading to low wear.
In this way the wheel can turn even at a great steering angle (strongly angled shaft).
40
a b
nachspur.eps
vorspur.eps
4WD GP Racing Chassis Promo 30 1:10 No. 3 59 50 / 60