Switching The Cooling On Or Off - Sartorius Stedim Biotech CERTOMAT CTplus Mode D'emploi Original

5.2.6 Setting the humidity set point
- Press the "HUMID" key.
The input menu of the humidity set point appears.
Fig. 23: Entry of humidity set point
- Enter the humidity set point (80%) on the screen
keypad, set "Mode" to "auto" and confirm with "ok".

5.2.7 Switching the cooling on or off

Caution: UHK versions only
- Press the "COOL" key.
The input menu for the cooling appears.
Fig. 24: Entry of COOL "On"/"Off"
- Switch off cooling by pressing "Off".
The humidity set point is set.
The "HUMID" key displays the
green underline for a humidity
set point of 80%.
The cooling is switched off.
The "COOL" key shows the grey
underline for operating mode
"Off".
View of the "Main" menu during the running
process.
25