Sartorius Stedim Biotech CERTOMAT CTplus Mode D'emploi Original page 110

Step
Enter temperature during
the Pre-step
Enter temperature via
numeric keypad on the
screen.
Switch alarm message on or
off
1)
Switch cooling on or off
during the
Pre-step
Switch cooling on or off.
Switch photo illuminance
on or off during the Pre-
step
Switch photo illuminance
on or off.
1)
UHK version only
34
Key, Symbol, Display
deactivated
activated
Input
Press "Value" key in "Pre-Step" line / "TEMP"
column.
Enter temperature via screen keypad and confirm
with "ok" key.
Press "Alarm" key for desired status
Note:
The "Highlimit" and "Lowlimit" alarm limits are
specified by the corresponding settings of the
controller.
These can be set in the "Controller" menu.
Press the "Value" key in the "Pre-Step" line /
"COOL" column.
Press "On" or "Off" key for desired status.
Press "Value" key in "Pre-Step" line / "ILLUM"
column.
Press "On" or "Off" key for desired status.