Sartorius Stedim Biotech CERTOMAT CTplus Mode D'emploi Original page 103

A system configuration takes into account suitable
operating values and necessary limitations of the
controller for the controlled terminal
[ Configuration documentation]. Each controller is
parameterized here in such a way that it allows stable
control.
6.1 Access to the controller
Example: Temperature regulator
6.1.1 Entering the set temperature value
- Press the "TEMP" key.
The input menu of the temperature regulator
appears.
Fig. 26: "Controller TEMP" menu
- Press the "Setpoint" key.
The "TEMP Setpoint" input menu appears.
Fig. 27: "TEMP Setpoint" menu
- Enter new set point via the screen keypad and
confirm with "ok".
The input menu of the temperature controller
appears with a modified temperature set point.
Fig. 28: "Controller TEMP" menu
27