5
"Main" function
Quick access to all controllers (TEMP, SHAKER, CO
HUMID) and switches (LIGHT, ILLUM, COOL) is gained
via the "Main" function key in the footer. After
pressing the key an overview menu appears first.
The controller operating symbols (TEMP, SHAKER, CO
HUMID) and the switches (LIGHT, ILLUM, COOL) are
then opened by pressing the functional element.
Fig. 17: "Main" menu of the CERTOMAT® CTplus
5.1
Functional elements of the "Main" menu
Key, Symbol
Meaning, Use
- Measured value of the
temperature in the CERTOMAT®
CTplus
- Input of the temperature set
point
- Operating mode selection for
the TEMP controller
- Continue with the controller
menu
- Shaker speed [rpm]
- Input of the set point for the
shaker speed
- Operating mode selection for
SHAKER controller
- Continue with the SHAKER
controller menu
- Working illuminance
ON / OFF
- Manual operation only
- Photo illuminance ON / OFF
- Can be switched manually
- Can be switched by program
control
- CO
concentration [%]
2
- Entry of the CO
set
2
concentration
- Continue with CO
controller
2
menu
,
2
,
2
5.2
Starting an incubation from the "Main" menu
In order to start an incubation from the "Main" menu,
proceed as follows.
Example:
- The following operating values are specified:
- Temperature:
- Speed:
- Working illuminance:
- Photo illuminance:
- CO
- Humidity
- Cooling:
5.2.1 Entering the temperature
- Press the "TEMP" key.
The input menu of the temperature regulator
appears.
Fig. 18: "Controller TEMP" menu
- Enter the temperature (37°C) via the screen keypad,
set the "Mode" to "auto" and confirm with "ok".
- Humidity set point [%]
- Entry of the humidity set
point (HUMID)
- Continue with humidity
set point (HUMID) controller
menu
Option:
- Cooling ON / OFF
- Can be switched manually
- Can be switched by program
control
37°C
50 rpm.
OFF
OFF
concentration
5%
2
80%
OFF
The heating mode starts.
The "TEMP" key shows the green
underline for operating mode
"auto" and the entered
temperature (37 °C) is displayed.
23