Sartorius Stedim Biotech CERTOMAT CTplus Mode D'emploi Original page 109

Step
Select mode
Enter program data
Define Pre-step
Enter speed during the
Pre-step
Enter speed via screen
keypad.
If necessary, switch alarm
message on or off
1)
Fig. shows UH version ("COOL" inactive)
Key, Symbol, Display
deactivated
activated
Input
Press the "Mode" key.
Press the "Modify" key.
1)
Press the "Value" key in "Pre-Step" line / "SHAKER"
column.
Enter speed via screen numeric keypad and
confirm with "ok" key.
Press "Alarm" key for desired status
Note:
The "Highlimit" and "Lowlimit" alarm limits are
specified by the corresponding settings of the
controller.
These can be set in the "Controller" menu.
33