Implements - Grillo FD13.09 Notice D'utilisation

PROCEDURE
Engine oil Check the level
Change
Air filter Check
Replace
Hydraulic oil Check the level
Replace
Check that the cooler intake grid is clean
Check that blades are well sharpened
and well-fixed
Lubricate with grease
Diesel filter Check
Replace
Deck gearbox Replace
P.T.O. gearbox Replace
Diesel decanting device
recommended procedure
* procedure to be carried out if necessary
LIFTING HOOKS AND TRANSPORT
The hooks location (fig. 38) allows the machine with its cutting deck to be perfectly balanced. Only lift the machine with suitable
equipment such as crane etc. When transporting the machine on a truck put the putting deck in a low position and secure the
machine with the correct straps or chains.
Translation of the original instructions
MAINTENANCE SUMMARY TABLE
EVERY
8 HOURS
Check
Clean
AFTER EVERY
20 HOURS 50 HOURS
(first change)

IMPLEMENTS

14
EVERY EVERY 250
100 HOURS HOURS
*
*
(first change
after 500 hours)
*
(every 300
hours)