Technical Specifications; Putting The Machine Into Service - Grillo FD13.09 Notice D'utilisation

ENGINE: YANMAR 3TNV82A, diesel, 1331 cc (18,9 kW @ 2800 r.p.m.), 3 cylinders, liquid-cooled
with electric valve, provided with manual and automatic device for radiator cleaning.
FUEL TANK: 23 litres. HYDRAULIC OIL TANK: 20 litres. STARTER: electric 12V.
Drive: hydraulic on all 4 wheels (permanent traction on tight turning radius).
AUTOMATIC AND MANUAL DIFF-LOCK BY PUSH BUTTON.
GEARBOX: hydrostatic transmission with hydraulic motors on all 4 wheels.
STEERING SYSTEM: hydraulic with steering wheel.
CLUTCH: hydraulic for PTO.
SPEED: from 0 to 15 km/h continuously variable.
WHEELS front: 23x 10.50-12 TURF Tyres; rear: 18×8.50-8 TURF Tyres.
SEAT: super comfort pneumatic ,adjustable seat with arm-rests.
STEERING WHEEL: fixed on steering column and adjustable.
TURNING RADIUS: 310 mm (± 12.20 in).
AUTOMATIC FEATURES: automatic disengagement of blades and load accelerator when the grass
catcher is full.
BRAKES: drums plus parking brake.
GRASS CATCHER: 900 litres. Automatic opening with hydraulic discharge.
DISCHARGE HEIGHT: 200 cm (± 78.7 in), REAR PROJECTION: 20 cm (± 15.7 in).
MOTORISED BAFFLE ALLOWING COMPLETE AND EVEN GRASS CATCHER FILLING.
LOAD ACCELERATOR: swinging blades, belt transmission and independent electromagnetic clutch (Ø350
mm).
HYDRAULIC DECK LIFT AND GRASS CATCHER DISCHARGE.
TWIN ELECTRICALLY OPERATED HYDRAULIC SERVICES: max. pressure 120 bars, max. flow 18 LT/
minute @ 3000 r.p.m.
132 CM CUTTER DECK: with collection and mulch kit. Cutting height: from 2 to 10 Cm, continuously
adjustable via hydraulic valve, from the driving position.
155 CM CUTTER DECK: with collection and mulch kit. Hydraulic maintenance position via a push button
from the driving position. Cutting height: from 2 to 12 cm, continuously adjustable through hydraulic
valve, from the driving position.
APPROX HOURLY MOWING CAPACITY: 12,000 m²/h (± 2.5 acres) 132 cm cutter deck; 15,000 m²/h
(± 3 acres) 155 cm cutter deck.
ATTACHMENTS: 132 cm (± 52 in) cutter deck with collection and mulching kit (weight 190 kg). 155 cm
(± 61 in) cutter deck with collection and mulching kit (weight 270 kg). 160 cm (63") cutter deck LMP
(side discharge – rear discharge – mulching) dimension with baffle 192 cm (76"), weight 170 kg. 130 cm
(50") cutting deck MP (rear discharge-mulching with quick shift lever) dimension 132 cm (52"), weight
150 kg. All purpose flail 130 cm with scarifier kit (optional). All purpose flail 160 cm (63") with scarifier kit
as a standard feature. Snow blade 150 cm, comfort cabin with heating, snow chains for front wheels.
SIZE (with 132 cm cutter deck):
Length: 325 cm (± 128 in)
Width: 141 cm (± 52 in)
Height: 175 cm (± 68.9 in)
GROUND CLEARANCE: 15 cm (± 5.9 in)
DISTANCE BETWEEN AXLES: 123 cm (± 48.4 in)
WEIGHT (without cutter deck): 1040 kg (±2293 lbs)
WEIGHT (with 132 cm cutter deck): 1230 kg (±2712 lbs)
WEIGHT (with 155 cm cutter deck): 1310 kg (±2888 lbs)
Make sure the machine is complete and that it has not been damaged during transport.
- Check the levels of the engine oil (fig. 14, ref. C) and hydrostatic transmission (fig. 4).
- Check the tyre pressures:
Front wheels 23×10.50 – 12 (1.4 bar)
Rear wheels 18×8.50 – 8 (1.4 bar)
Deck wheels (1.5 bar)
Check the battery voltage, it must not be less than 12.5 Volts; recharge if necessary.
If a dry battery has been supplied with separate acid, to put the machine into service proceed as follows:
1) pour in the acid and wait 2 hours;
2) charge the battery with a charger set to 12 Volts on a slow charge for 2 hours.
Caution, if this procedure is not observed this could lead to the battery deteriorating and the acid leaking out during work.
Translation of the original instructions

TECHNICAL SPECIFICATIONS

PUTTING THE MACHINE INTO SERVICE

7