EN
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT
When using an electrical machine, basic safety precautions should always be followed, including the following:
Please read the instruction manual carefully before using this machine.
Keep the instruction manual at a suitable place with the machine and hand it over if you give the machine to a third party.
When the machine is not in use or left unattended, always disconnect the machine from the power supply
system. Unplug it from the outlet.
DANGER!
To reduce the risk of electric shock:
1. Never leave the machine unattended when it is plugged in.
2. Always unplug this machine from the electric outlet immediately after using and before cleaning.
3. LED RADIATION: Do not view directly with optical instruments Class.
WARNING!
To reduce the risk of burns, fire, electric shock or injury to persons:
1. The machine mustn't be used by children under 8 or by people with reduced physical, sensory or mental capabilities or
if there is a lack of experience and knowledge how to operate the machine. Unless they have been given instruction
concerning the use of the machine and the involved risks by a person who is responsible for their safety.
2. Do not use this machine as a toy. Close attention is necessary when this machine is used by children, near children or
people with reduced sensation.
3. Use this machine only for its intended use as described in this manual. Use only accessories recommended by the
manufacturer.
4. Children should be supervised to ensure that they do not play with the machine.
5. Never operate this machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped or
damaged, or dropped into water. Return the machine to the nearest authorized dealer or service centre for
examination, repair, electrical or mechanical adjustment.
6. Never operate the machine with any air openings blocked. Keep ventilation openings of the machine and the
foot control free from accumulation of lint, dust, and loose cloth.
7. Keep fingers away from all moving parts. Special care is required around the machine needle.
17