Kärcher WWP 45 Mode D'emploi page 10

EU Declaration of Conformity
We hereby declare that the machine described below
complies with the relevant basic safety and health re-
quirements in the EU Directives, both in its basic design
and construction as well as in the version placed in cir-
culation by us. This declaration is invalidated by any
changes made to the machine that are not approved by
us.
Product: Waste water pump
Type: 1.042-xxx
Currently applicable EU Directives
2006/42/EC (+2009/127/EC)
2011/65/EU
2014/30/EU
2000/14/EC
Harmonised standards used
EN 809: 1998: A1: 2009 + AC: 2010
EN IEC 63000: 2018
EN ISO 14982:2009
National standards used
-
Conformity evaluation procedure used
2000/14/EG: Anhang V
Sound power level dB(A)
Measured: 101
Guaranteed: 104
The signatories act on behalf of and with the authority of
the company management.
Documentation supervisor:
S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Ph.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden,2024 /01/02
Pump
Nominal width"
Maximum flow rate
Suction height (max.)
Delivery height (max.)
Internal combustion engine
Engine type
Type
Cooling type
Engine capacity
Engine performance
Fuel type
Fuel tank capacity
Working time with a fully filled fuel tank
Engine oil volume
Oil type
Spark plug type
Dimensions and weights
Length
Width
Height
Weight without fuel
CO Emissions according to the measurement procedure of EU regulation 2016/1628 Euro V
2
Motor
Subject to technical modifications.
10
Declaration of Conformity
We hereby declare that the product described below
complies with the relevant provisions of the following
UK Regulations, both in its basic design and construc-
tion as well as in the version put into circulation by us.
This declaration shall cease to be valid if the product is
modified without our prior approval.
Product: Waste water pump
Type: 1.042-xxx
Currently applicable UK Regulations
S.I. 2008/1597 (as amended)
S.I. 2012/3032 (as amended)
S.I. 2016/1091 (as amended)
S.I. 2001/1701 (as amended)
Designated standards used
EN 809: 1998: A1: 2009 + AC: 2010
EN IEC 63000: 2018
EN ISO 14982:2009
National standards used
-
Applied conformity assessment procedure
2000/14/EG: Anhang V
Sound power level dB(A)
Measured: 101
Guaranteed: 104
The signatories act on behalf of and with the authority of
the company management.
Documentation supervisor:
S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Ph.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2024/01/02
Technical data
English
WWP 45
3
l/h 45000
m 7
m 25
Single-cylinder
4-stroke
Air-cooled
3
cm 196
kW/PS 5,1/6,9
Petrol, min. 88 octane
l 3,6
h 2,1
l 0,5
10 W-30
15 W-40
F5T, F6TJC, F7TJC
mm 580
mm 440
mm 450
kg 36
g/kWh 790