Corghi HD 700 Manuel D'utilisation page 63

14) Move the platform to move the wheel away
from the turntable.
15) Remove the wheel.
CAUTION
Do not inflate the tyre with the wheel
still mounted on the turntable.
Tyre inflation is dangerous and should
only be done by removing the wheel
from the turntable and placing it inside
a safety cage.
- E - Operator's manual HD 700
nglish
MAINTENANCE
CAUTION
CORGHI declines all liability for claims
deriving from the use of non-original
spare parts or accessories.
ATTENTION
Unplug the machine from the socket
and make sure that all moving parts
have been locked before performing any
adjustment or maintenance operation.
ATTENTION
Do not remove or modify any parts of this
equipment except in the case of service
operations.
ATTENTION
Before removing unions or pipes, make
sure that the fluids are not pressurised.
If pressurised oil escapes, it can cause
serious injury.
CAUTION
Keep the work area clean.
Do not use pressurised water jets to
wash the machine
You are strongly advised not to use
compressed air to clean moving
components.
When cleaning, take care not to create
and raise dust as far as possible.
For perfect operation and greater dura-
tion of your tyre changer, following these
instructions carefully:
1) Lubricate the following parts periodically
after cleaning them carefully with naphtha:
- the various joints on the turntable;
- the tool holder arm guide;
- the carriage guide plate.
2) Grease the turntable arm lifting cylinder and
the arm joint periodically through the grease
nipples (see fig. 39).
Use ordinary lubricating grease.
N.B. To reach the grease nipple on the arm, first
UK
63