Corghi HD 700 Manuel D'utilisation page 59

WHEELS WITH A
SIDE RING
BEAD BREAKING AND
DEMOUNTING
WHEELS WITH 3-PIECE SIDE RINGS
1) Clamp the wheel on the turntable, as previ-
ously described, and ensure that it is deflated.
2) Move the mobile control unit to work-
ing position C.
3) Lower the tool holder arm into its working
position until it hooks with the ratchet.
4) Position the bead breaker disc flush with the
side ring, see Fig. 34.
5) Turn the turntable and advance the bead
breaker disc with small forward movements fol-
lowing the side ring profile until the first bead
is completely detached.
N.B.: lubricate during this operation.
- E - Operator's manual HD 700
nglish
CAUTION
For wheels with an inner tube, be ex-
tremely carefully when stopping the
bead breaker disc from moving forward
immediately after the bead is detached
to prevent damaging the valve and the
inner tube.
6) Repeat the operation, making the bead
breaker disc move forward against the side
ring (see fig. 35) until the locking ring is freed,
which will be removed using the side ring
lever or with the help of the bead breaker disc.
7) Remove the side ring.
8) Move the tool holder arm away from the
rim edge.
Release the ratchet and lift the arm to the non-
working position.
34
Move the tool holder arm to the inner side of
the wheel.
9) Press the tool rotation lever and turn it 180°,
the tool will lock automatically. Lower the arm
to the working position.
10) Turn the turntable and advance the bead
breaker disc with small forward movements
following the side ring profile until the second
bead is completely detached.
N.B.: lubricate during this operation.
35
UK
59