Corghi HD 700 Manuel D'utilisation page 44

are considered as improper use and shall be
construed as negligence.
DANGER
The manufacturer does not intend the machine
to be used for inflation operations. If the opera-
tor decides to proceed with partial bead inser-
tion in the tyre on the machine using his own
equipment, a pressure of 0.5 bar must NOT be
exceeded (unless the tyre manufacturer does
requires lower pressure levels), as indicated
in the UNI Standard 10588.
D
A
C
44
A
B
C
8
D
E
F
CAUTION
Only original manufacturer equipment is rec-
ommended for use with the machine.
Figure 8 shows the operator positions during
the various work phases.
These positions are referred to in the user
instructions
MAIN WORKING
ELEMENTS OF THE
MACHINE
CAUTION
Get to know your machine: your familiarity
with its exact operation is the best guarantee
of safety and performance.
Learn the function and location of all com-
mands.
Carefully check that all controls on the machine
are working properly.
The machine must be installed properly, oper-
ated correctly and serviced regularly in order
to prevent accidents and injuries.
See fig.9.
A Main switch
B
G
L
O
N
- E - Operator's manual HD 700
nglish
H
I
9
M