CAUTION
To prevent accidents when using the included
or optional accessories, make sure that the
mechanical parts have been correctly installed
and well fixed to the parts.
When working, firmly grip the manual acces-
sories.
NOTE
The machine may also be used for tyre groov-
ing. Operate the turntable intermittently for
this operation.
CAUTION
Always check that the tyre size is compatible
with the rim size prior to assembly.
CAUTION
Do not clean or wash the wheels mounted on the
machine with compressed air or jets of water.
KEY TO DANGER/
CAUTION DECALS
NEVER insert hands, arms or anything else in-
side the turntable while it is opening or closing.
While the turntable is being lowered, both with
a mounted wheel or with the turntable open,
maintain a safe distance to prevent crushing.
46
NEVER come between the tool unit and the rim
or locked wheel on the turntable.
Keep a safe distance when the tool unit is tilting
to prevent crushing.
For safety reasons, never leave the wheel locked
on the turntable during work breaks.
Before continuing, always check that the tool
holder arm ratchets are correctly hooked to
the carriage.
If replacing the tool unit, pay attention during
insertion to keep your hands from being crushed.
Do not open the control unit door before
disconnecting the tyre changer from the mains.
- E
- Operator's manual HD 700
nglish