Corghi HD 700 Manuel D'utilisation page 47

DESCRIPTION
OF THE MOBILE
CONTROL UNIT
CONTROLS
Fig. 10
CONTROL LEVER (P)
- Horizontal movement → platform and tool
carriage translation
- Vertical movement → turntable unit lowering
and lifting
SWITCH (Q)
- Vertical movement → turntable unit opening
P
R
and closing control.
PEDAL (R)
- Tilting movement → clockwise and anticlock-
wise rotation of the turntable unit
- E - Operator's manual HD 700
nglish
When locking a rim, continue to operate
the control to make sure that the maximum
pressure (130 bar) has been reached, which can
be checked on the pressure gauge (C, Fig. 9).
The distributor-turntable pressure tests are
performed with the wheel mounted.
CAUTION
When working, always control the pressure of
the turntable
NOTE
Also check the pressure during tyre mounting
and demounting operations; to solve rim set-
tling problems, continue to operate the locking
control.
The control unit must never be positioned in
an area where water can stagnate.
Q
10
CAUTION
CAUTION
CAUTION
UK
47