Type
FS 30F
DK50 PLUS
FS 30M
Dk50 PLUS/M
DK50 2V
FS 30S
DK50 2V/M
FS 30A
**) A – submicrofilter with activated carbon
8.2.3. Filter set regulator assembly
The compressor may be equipped with a pressure regulator of the compressed air outlet if specified.
The regulator must be selected according to the application to the filter set, or separately The
regulator shall ensure constant pressure at the outlet.
Type
Regulator complete
(to the filter assembly)
REG11 (separate)
8.2.4. Filter set brackets
A suitable bracket must be ordered for every filter set.
Type
Compressor-mounted bracket
8.2.5. Condensation and filtration unit
The compressor may be additionally fitted with a condensation and filtration unit (KJF-1, KJF-2 or
KJFR-1). The KJF-1, KJF-2 or KJFR-1 ensure that the compressed air from the air tank is cooled
in the cooler and the condensate is captured in the filter and automatically separated from the
pneumatic distribution system. The compressed air is filtered at the same time.
Type
Use
KJF-1
DK50 PLUS
KJFR-1
DK50 2V
KJF-2
8.2.6. Equipotential bonding socket
The socket allows an equipotential bonding. (Fig. 12)
Type
POAG-KBT6-EC
FLEXI-S/POAG-HK6
NP-DK50 PLUS, 2V-18_02-2023-MD
Use
Level of filtration (µm)
DK50 PLUS, DK50 PLUS/M
DK50 2V, DK50 2V/M
DK50 PLUS, DK50 PLUS/M
DK50 2V, DK50 2V/M
Level of filtration /µm/
5
Use
DK50 PLUS S
DK50 PLUS S/M
DK50 2VS, DK50 2VS/M
1
1+0.1
1+0.01
1+0.01+A**
Use
Use
Pressure regulator
Name
Mains plug
connector
Conductor (1 m)
- 20 -
DK50 PLUS, DK50 2V
Article number
604014119-014
604014119-015
604014119-017
604014119-018
Article number
604014130-000
447000001-077
Article number
603014134-000
Article number
no
450001011-001
yes
450001011-002
no
450001021-001
Article number
033400075-000
034110083-000
02/2023