EKOM DK50 PLUS Manuel De L'utilisateur page 10

TECHNICAL DATA
Compressors are designed for dry and ventilated indoor environments with the following conditions:
Temperature
Relative humidity
5 – 7 bar
Rated voltage / frequency
(*)
Performance at 5 bar
Working pressure (**)
Rated current
Motor power
Air tank volume
Air quality – filtration
Maximum operating
pressure of safety valve
Noise level at 5 bar
Duty cycle
PDP - drying performance
at 7 bar
Time to fill air tank from 0
to 6 bar
Dimensions (net)
w x d x h
Net weight (***)
Classification under
EN 60601-1
Notes:
(*) When ordering, state the version of the compressor
(**) For other range of pressure:consult with the supplier
(***) Information about the weight is for informative purposes only and applies to the product without any
additional accessories.
Dependence of compressor output on working pressure
NP-DK50 PLUS, 2V-18_02-2023-MD
DK50 PLUS
230 / 115 /
V / Hz
50/60 60
Lit.min-1 75/85 85
5.0 – 7.0
bar
A 3.8/4.8 8.9
kW 0.55
Lit. 25
m
-
bar 8.0
LpfA [dB]  66/68  68
S1-100%
-
s 123/105 105
mm 460x500x708
kg 48
- 10 -
DK50 PLUS, DK50 2V
+5°C to +40°C
max. 70%
DK50 PLUS S DK50 PLUS/M DK50 PLUS S/M
230 / 115 / 230 /
50/60 60 50/60
75/85 85 58/68
5.0 – 7.0 5.0 – 7.0
3.9/4.9 9 3.9/4.9
0.55 0.55
25
-
8.0
 47/50  50  66/68
S1-100% S1-100%
 +3°C
-
123/105 105 157/128
560x675x877 460x565x708
87
Class I.
115 / 230 /
115 / 60
60 50/60
68 58/68
5.0 – 7.0
9 4/5
0.55
25 25
0.1 0.1
8.0 8.0
 68  47/50  50
S1-100%
 +3°C
128 157/128
560x675x877
53 92
02/2023
68
9.1
128