Publicité
REAR WHEEL AND REAR BRAKE
5 - 21
4. Inspect:
Brake drum inner surface.
Oil/scratches → Remove.
Use a rag soaked in lac-
Oil
quer thinner or a solvent.
Use a emery cloth (lightly
Scratches
and evenly polishing).
ASSEMBLY AND INSTALLATION
Brake shoe plate assembly
1. Install:
Brake camshaft 1
NOTE:
Apply the lithium soap base grease on the
brake camshaft.
2. Check:
Brake camshaft operation
Unsmooth operation → Repair.
3. Install:
Wear indicator plate 1
NOTE:
When installing the wear indicator plate to the
brake camshaft align the projection a on the
wear indicator plate with the slots b on the
brake camshaft.
4. Install:
Brake camshaft lever 1
10 Nm (1.0 m · kg, 7.2 ft · lb)
NOTE:
Install the brake camshaft lever so that the
angle b between a line drawn through the hub
of the brake shoe and dot a, and a line drawn
through the midline of the camshaft and dot a
is 46.5˚.
CHAS
Publicité
