Publicité
FRONT BRAKE
2. Pass the brake hose through the cable
guide 1.
3. Install:
Copper washer 1
Joint 2
Brake hose 3
WARNING
Always use a new copper washer.
NOTE:
When turning the joint over the brake hose,
hold the brake hose so that it may not be
twisted.
4. Install:
Brake hose holder 1
Bolt (brake hose holder ) 2
5 - 14
CHAS
New
26 Nm (2.6 m · kg, 19 ft · lb)
14 Nm (1.4 m · kg, 10 ft · lb)
7 Nm (0.7 m · kg, 5.1 ft · lb)
Publicité
