Publicité
ENGINE OIL LEVEL INSPECTION
NOTE:
Squeeze out the excess oil. Element should be
wet but not dripping.
ENGINE OIL LEVEL INSPECTION
3 - 7
6. Apply:
Foam-air-filter oil or engine mixing oil
To the element.
7. Install:
Air filter element 1
On air filter guide 2.
8. Apply:
Lithium soap base grease
On the matching surface a on air filter
element.
9. Install:
Air filter element 1
Washer 2
Wing nut 3
1. Start the engine, warm it up for several
minutes and wait for five minutes.
2. Place the machine on a level place and
hold it up on upright position by placing
the suitable stand under the engine.
3. Remove:
Dipstick 1
INSP
ADJ
Publicité
