Bronpi LONDRES Instructions D'installation, D'utilisation Et D'entretien page 43

WARNING:
Switching on the appliance in the absence of internal parts will cause the structure of the appliance to overheat and may
cause damage to the appliance, which will be exempt from the product warranty.
In the Cairo-70 model, you can choose between vermiculite or firetek inside the combustion chamber, therefore, you will receive the parts
inside a box. Before lighting the device, all the parts must be correctly positioned, by following the above steps.
ADJUSTMENT OF THE CERAMIC PIECES INSIDE THE COMBUSTION CHAMBER (for Cairo 90 and 110 models)
The Cairo series of inserts has the possibility of choosing the interior of the combustion chamber in the VERMICULITE option or the CERAMIC
option.
The ceramic pieces may have slight differences in size from one to another.
To make a perfect coupling of the pieces that compose the interior in the ceramic option, an adjustment system has been incorporated that
consists of a screw that will be turned from the outside of the combustion chamber, which will bring the pieces closer together to eliminate the
separation that may appear between them.
Adjustment procedure:
1. The first step is to prepare the interior of the combustion chamber, so all the accessories originally incorporated in the insert must be
removed, leaving the fire base free.
2. Initially, the screw must be flush with the interior face of the combustion chamber in order to install the ceramic pieces.
3. The interior is mounted with the ceramic pieces. If the pieces remain together, without spaces, this part of the assembly can be
considered as completed.
4. If there are spaces between the pieces, turn the side screws clockwise to push the side pieces, reducing the space between them.
5. Once there is no space left between the parts, the adjusting screws must be turned half a turn anticlockwise, to release the tensions so
that the ceramic parts can be dismantled if it's necessary to access the fan support at any time.
PLACING THE DEFLECTOR
As indicated above, the deflector is a fundamental part for the proper functioning of the insert. It must be in the correct position and the insert
must never be used without the deflector in place, which would result in the loss of the warranty.
WARNING:
The absence of the deflector causes
excessive draught, which causes too rapid
combustion, excessive wood consumption
and the consequent overheating of the appliance.
The baffle plate in the Cairo-70 model is disassembled.
You will find it inside the combustion chamber. To fit it,
proceed as explained below:(see drawing D2.44):
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS
D2.40
D2.42
42
D2.44
D2.41
D2.43
INSERTS