Basic Procedures - Use - SICE S 1000 Manuel D'instructions

5. BASIC PROCEDURES - USE

CRUSHING HAZARD:
Some parts of the machine, such as the tool head and turntable,
move by themselves.
An audible warning signal sounds when these parts move.
Do not approach moving parts of the machine.
To stop the machine in an emergency:
- press the stop button on the button panel (1);
- press the switch then disconnect the power plug (2);
- isolate the compressed air circuit with the shut-off valve
(quick release connector) (3).
124
CAUTION!
CAUTION!
1
2
3
User manual S 1000