Maintenance - SICE S 1000 Manuel D'instructions

When the machine is disconnected from the air supply, the devices
bearing the sign shown above may remain pressurised.
The "Spare parts" handbook does not authorise the user to perform any work on the
machine other than the operations described specifically in the User Manual, and must
only be used as reference to allow the user to provide the technical support service with
precise information to minimise service times.
Do not remove or change any part of the machine (except for maintenance purposes).
It is prohibited to perform any operation that changes the pre-established value of the
pressure regular valve or pressure limiter. The manufacturer declines all liability for
damage resulting from tampering with these valves.
Disconnect the machine from mains electricity and the compressed air supply and en-
sure that all moving parts are securely immobilised before making any adjustments or
performing any maintenance work.
Keep the working area clean. Do not use compressed air, jets of water or thinner to re-
move dirt or residuals from the machine. While cleaning, try as far as possible to prevent
dust from forming or rising.
The builder cannot be held responsible in the event of any damage caused by using non-
original spare part or accessories.
User manual S 1000

7. MAINTENANCE

DANGER
CAUTION!
CAUTION!
CAUTION!
CAUTION!
WARNING
CAUTION!
UK
165