General Conditions Of Use - SICE S 65 Manuel D'instructions

GENERAL CONDITIONS OF USE

The equipment is intended for professional use only.
WARNING
Only one operator at a time can work with the machine.
The wheel balancers described in this manual must be used exclusively to measure the
extent and position of car wheel unbalances, within the limits specified in the Technical
specification section. Furthermore, models equipped with motors must be provided
with a suitable guard, fitted with a safety device, which must be lowered during the spin
operation.
WARNING
Any use of the machine other than the described use is to be considered as improper and
unreasonable.
WARNING
Do not start the machine without the wheel locking equipment.
WARNING
Do not use the machine without the guard and do not tamper with the safety device.
WARNING
Do not clean or wash the wheels mounted on the machine with compressed air or
jets of water.
WARNING
When working, never use equipment not manufactured by the manufacturer.
WARNING
Get to know your machine: The best way to prevent accidents and obtain top perform-
ance from the machine is to ensure that all operators know how the machine works.
Learn the function and location of all the controls.
Carefully check that all controls on the machine are working properly.
To prevent accidents and personal injury, all the equipment must be correctly installed,
correctly operated and correctly serviced.
78 User manual S 65