2.
SAFETY INSTRUCTIONS
INFORMATION ON ASSEMBLY
•
The product should be carefully assembled by a responsible adult. Ask for the
assistance of another, technically-skilled person in case of doubt.
•
Before beginning assembly of the product, read all assembly steps carefully
and review the diagram.
•
Remove all packaging materials and place all individual components on a free
surface. This will give you a good overview and simplify assembly. Shield the
assembly surface from filth and scratching by laying down suitable padding.
•
Check the components against the components list to make sure all are
present. Do not dispose of all packaging materials until assembly is completed.
•
Please note that there is always a risk of injury when using tools to carry
out manual tasks. Therefore, please exercise caution when assembling this
product.
•
Make sure your work environment is hazard-free. For example, do not leave
any tools lying around. Place the packaging materials somewhere where they
will not pose any hazards during assembly. Packaging foil or plastic bags pose
a suffocation hazard for children!
•
After assembling the product according to the instructions, make sure that all
screws, bolts and nuts are installed correctly and tightened.
•
If necessary, lay out protective padding (not included) beneath the product to
protect your floor as there is no guarantee that, for instance, the rubber feet will
not leave marks behind.
SP-MSP-008-P-IM-INT.indb 22
22
26/2/15 3:06 pm