Information On Assembly - Sportplus SP-MR-1100 Notice D'utilisation

• Always verify that the product is in impeccable condition before use. Defective
components must be replaced immediately as failure to do so may impair the
functioning and safety of the product.
• Make sure that no more than one person uses the product at a time.
• Always operate the product on a horizontal and nonslip surface. Never use the
product near water and make sure there is a safety clearance of at least 0.6 m on
all sides of the product.
• Prevent your arms and legs from coming near the product's moving components.
Do not put any objects into any openings on the product.
CAUTION – PRODUCT DAMAGE
• Do not alter the product in any way and use only original replacement parts. Have
all repairs carried out in a professional workshop or from similarly qualified persons
– improper repairs can lead to serious risks for the user. Use the product for the
intended purposes as described in the user manual only.
• Shield the product from spraying water, moisture, high temperatures and direct
sunlight.
ADVICE WITH REGARD TO BATTERIES
• Remove the batteries if they are empty or if you are no longer using the product. In
this way, you will avoid damages that can be caused by leaking.
• The batteries may not be charged or activated with other means, dismantled,
thrown into fire or short-circuited. There is a DANGER OF EXPLOSION!
• Preferably use alkaline batteries, since they last longer than regular zinc-carbon
batteries.
• A battery replacement is necessary as soon as the display starts to fade or fades
completely. Always replace all old batteries with new ones and make sure that the
batteries are inserted with the correct polarity.

INFORMATION ON ASSEMBLY

• The product should be carefully assembled by a responsible adult. Ask for the
assistance of another, technically-skilled person in case of doubt.
• Before beginning assembly of the product, read all assembly steps carefully and
review the diagram.
• Remove all packaging materials and lay out all the parts. This will give you a
good overview and simplify assembly. Shield the assembly surface from filth and
scratching by laying down suitable padding.
SP-MR-1100-IM-V02.indb 34 SP-MR-1100-IM-V02.indb 34
34
27 Aug 2021 9:21:29 am 27 Aug 2021 9:21:29 am