Sportplus SP-MSP-008-P Instructions D'utilisation page 24

3. ASSEMBLY INSTRUCTIONS
SP-MSP-008-P-IM-INT.indb 24
Step 1:
Insert the two feet into the ends of the rear
stabilizer. Fasten the feet with one screw
each.
Step 2:
Fasten the pull cables to the fastening eyes
in front of the pedals using the snap hooks.
Step 3:
Insert the battery in the back of the computer.
Heed correct polarity (+ and -). Connect the
sensor cable to the computer and insert the
computer into the front frame.
Step 4:
Insert the turn knob into the front frame.
24
26/2/15 3:06 pm