ADVICE WITH REGARD TO BATTERIES
• Batteries could be fatal if swallowed. For this reason, store batteries out of the reach
of children. If a battery has been swallowed, seek medical attention immediately.
• Remove the batteries if they are empty or if you are no longer using the product. In
this way, you will avoid damages that can be caused by leaking.
• The batteries may not be charged or activated with other means, dismantled,
thrown into fire or short-circuited. There is a DANGER OF EXPLOSION!
• Heed correct polarity (+ and -) when inserting the batteries. Always replace all
batteries with new ones. Do not use old and new batteries or batteries of different
types together!
• Preferably use alkaline batteries, since they last longer than regular zinc-carbon
batteries.
• A battery replacement is necessary as soon as the display starts to fade or fades
completely.
INFORMATION ON ASSEMBLY
• Assembly of the product must be carried out carefully by an adult person. Ask for
the assistance of another person with technical insight in case of doubt.
• Before beginning assembly of the product, read all assembly steps carefully and
review the diagram.
• Remove all packaging materials and place all individual components on a free
surface. This will give you a good overview and simplify assembly. Shield the
assembly surface from filth and scratching by laying down suitable padding.
• Check the components against the components list to make sure all are present.
Do not dispose of all packaging materials until assembly is completed.
• Please note that there is always a risk of injury when using tools or completing
manual tasks. Therefore, please exercise caution when assembling this product.
• Make sure your work environment is hazard-free. For example, do not leave
any tools lying around. Place the packaging materials somewhere where they
will not pose any hazards during assembly. Packaging foil or plastic bags pose a
suffocation hazard for children!
• After assembling the product according to the instructions, make sure that all
screws, bolts and nuts are installed correctly and tightened.
• If necessary, lay out protective padding (not included) beneath the product to
protect your floor as there is no guarantee that, for instance, the rubber feet will
not leave marks behind.
18