Information On Assembly - Sportplus SP-MR-011 Mode D'emploi

• Always use the product on a horizontal, level, nonslip and solid surface. Never use
it in the vicinity of water and observe a safety clearance of at least
of the product.
• Prevent your arms and legs from coming near the product's moving components.
Do not put any objects into any openings on the product.
CAUTION - PRODUCT DAMAGE
• Do not alter the product in any way and use only original replacement parts. Have
all repairs carried out in a professional workshop or from similarly qualified persons
- improper repairs can lead to serious risks for the user. Use the product for the
intended purposes as described in the operating instructions only.
• Shield the product from spraying water, moisture, high temperatures and direct
sunlight.
ADVICE WITH REGARD TO BATTERIES
• Remove the batteries if they are empty or if you are no longer using the product. In
this way, you will avoid damages that can be caused by leaking.
• Do not charge or use any tools to reactivate batteries. Do not dismantle, throw into
fire or short-circuit. There is a DANGER OF EXPLOSION!
• Preferably use alkaline batteries, since they last longer than regular zinc-carbon
batteries.
• A battery replacement is necessary as soon as the display starts to fade or fades
completely. Always replace all old batteries with new ones and make sure that the
batteries are inserted with the correct polarity.
• Batteries could be fatal if swallowed. If a battery is swallowed, it may lead to
serious internal injury and death within
and depleted batteries as well as the product out of the reach of children. If you
suspect a battery has been swallowed or otherwise entered the body, seek medical
attention immediately.
• If a battery leaks, avoid contact with skin, eyes and mucous membranes. In case of
acid contact, rinse the affected areas thoroughly with water and immediately seek
medical attention.

INFORMATION ON ASSEMBLY

• The product should be carefully assembled by a responsible adult. Ask for the
assistance of another, technically-skilled person in case of doubt.
• Before beginning assembly of the product, read all assembly steps carefully and
review the diagram.
• Remove all packaging materials and lay out all the parts. This will give you a
good overview and simplify assembly. Shield the assembly surface from filth and
scratching by laying down suitable padding.
• Check the components against the components list to make sure all are present.
Do not dispose of all packaging materials until assembly is completed.
• Please note that there is always a risk of injury when using tools to carry out
manual tasks. Therefore, please exercise caution when assembling this product.
2 hours. For this reason, always store new
34
1 m on each side