Information On Assembly; Training Area - Sportplus SP-WR-1800 Mode D'emploi

Rameur à eau en bois
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

INFORMATION ON ASSEMBLY

The product should be carefully assembled by a responsible adult. Ask for the
assistance of another, technically-skilled person in case of doubt.
Before beginning assembly of the product, read all assembly steps carefully and
review the diagram.
Remove all packaging materials and lay out all the parts. This will give you a
good overview and simplify assembly. Shield the assembly surface from filth and
scratching by laying down suitable padding.
Check the components against the components list to make sure all are present.
Do not dispose of all packaging materials until assembly is completed.
Please note that there is always a risk of injury when using tools to carry out
manual tasks. Therefore, please exercise caution when assembling this product.
Make sure your work environment is hazard-free. For example, do not leave any
tools lying around.
After assembling the product according to the instructions, make sure that all
screws, bolts and nuts are installed correctly and tightened.
If necessary, lay out protective padding (not included) beneath the product to
protect your floor as there is no guarantee that, for instance, the rubber feet will not
leave marks behind.
Make sure that all screws and nuts are securely tightened before using the product.

Training area

Caution Risk of crushing! Moving parts such as the seat (P) may crush,
pinch, or cut body parts. Do not touch the slide rail (O, L) while using the
product!
SP-WR-1800-IM-V02.indb 38
SP-WR-1800-IM-V02.indb 38
Illustration A
38
1 Sep 2021 6:25:32 pm
1 Sep 2021 6:25:32 pm

Hide quick links:

Publicité

Table des Matières
loading

Table des Matières