Mectron compact piezo LED Mode D'emploi Et D'entretien page 25

DISASSEMBLING PARTS FOR CLEANING AND STERILISATION
• Leave the ultrasonic vibrations to work,
do not exert excessive pressure on the
inserts during use. Apply slight force on
the insert for optimum performance.
• When the insert is used in interproximal
spaces, do not block the instrument
or leverage on the operating part. The
inserts must be left free to vibrate.
• In endodontic root canal therapy, never
operate the files outside of the root
canal to prevent them from breaking.
5 DISASSEMBLING PARTS FOR CLEANING
AND STERILISATION
Before carrying out the cleaning procedures
described in Chapter 6 on page 19
nect all accessories and components of the
COMPACT PIEZO LED.
If present, remove the insert from the
handpiece using the torque wrench;
Disconnect the handpiece from the rel-
ative cord;
To prevent breakages, create a smooth
path with a manual endo file and plan
the most direct possible path of access
to minimise any bending of the insert.
Make delicate movements. Examine
the file often for signs of wear. If the file
breaks inside the canal, avoid contact
between the instrument and the broken
file to stop it from being pushed further
it. Do not apply pressure on the insert in
an axial direction.
WARNING: Switch the appliance off.
, discon- Always switch the appliance off using the
switch and disconnect the power supply
cable from the wall socket and machine
core unit before carrying out cleaning and
sterilisation tasks.
1
2
17